How To Connect Wifi To Laptop Windows 10 Without Password

A Wi-Fi adapter makes it user-friendly to connect your Windows 10 laptop or desktop to the network and internet without dealing with cables. However, it'due south merely convenient as long as you lot know where to detect the settings to connect.

Whether you lot're setting upwards a device for the first time, connecting in a new place, or if yous're looking for an efficient method to connect multiple devices to the same network, Windows 10 offers various ways to connect to the internet using a Wi-Fi connection quickly.

In this Windows 10 guide, we walk you through the steps to connect to a Wi-Fi network using the network flyout in Taskbar, Settings, Control Console and using command lines with Control Prompt.

• How to connect to Wi-Fi network using Taskbar
• How to connect to Wi-Fi network using Settings
• How to connect to Wi-Fi network using Command Panel
• How to connect to Wi-Fi network using Command Prompt

How to connect to Wi-Fi network using Taskbar

To connect to a Wi-Fi network through the taskbar, employ these steps:

1. Click the Network icon in the bottom-right corner of the taskbar.

   Quick note: Alternatively, you can open up Action Center (Windows central + A), and and then click the Network button in the Quick actions section to access the network flyout. If you don't encounter the push, click the up arrow button on the left.

2. Select the wireless network to connect.
3. (Optional) Check the Connect automatically selection.

4. Click the Connect button.

   Source: Windows Central

   Quick tip: If you do not run across any wireless access signal in the listing, click the Wi-Fi button to plough on the adapter.

5. Confirm the network security primal (countersign).

   Source: Windows Central

6. Click the Next button.
7. Ostend whether the device should be discoverable in the network past other PCs.

Once you complete the steps, the laptop will connect to the network using the Wi-Fi connection.

Reconnect automatically

In addition, Windows x also offers an selection to reconnect the device automatically after disconnecting the adapter manually.

To set the Wi-Fi adapter to reconnect automatically on Windows 10, utilise these steps:

1. Click the network icon in the organisation tray.

2. Click the Wi-Fi button to turn off wireless connectivity.

   Source: Windows Central

3. Employ the drop-downwardly carte du jour and select when to re-connect automatically:

   • Manually.
   • In one hour.
   • In iv hours.
   • In ane 24-hour interval.

   Source: Windows Central

After you lot consummate the steps, Windows 10 won't try to connect to a wireless connexion until the time yous selected. When using this functionality, the device will only connect automatically to the networks you take connected to in the by.

How to connect to Wi-Fi network using Settings

Using "Network & Security" settings, you lot can also add wireless connections manually, and then when the network is in range, the device will connect automatically.

To prevision a Wi-Fi connection on Windows ten, use these steps:

1. Open up Settings.
2. Click on Network & Security.
3. Click on Wi-Fi.

4. Click the Manage known networks option.

   Source: Windows Central

5. Click the Add a new network push.

   Source: Windows Central

6. Confirm the name of the network.
7. Use the driblet-downward menu to select the Security type – For case, WPA2-Personal AES.

8. Confirm the network security key (password).

   Source: Windows Cardinal

9. Check the Connect automatically pick.
10. Check the Connect even if this network is not broadcasting option (if required).
11. Click the Save button.

Once you consummate the steps, the device will connect automatically when the wireless network is in range.

How to connect to Wi-Fi network using Command Panel

To connect to a Wi-Fi network with Control Panel, utilize these steps:

1. Open Control Panel.
2. Click on Network and Internet.
3. Click on Network and Sharing Center.

4. Nether the "Change your networking settings" department, click the Set up a new connection or network option.

   Source: Windows Primal

5. Select the Manually connect to a wireless network option.

   Source: Windows Central

6. Click the Next button.
7. Confirm the network name.
8. Use the drib-down carte to select the Security type — for example, WPA2-Personal.
9. Ostend the network security central (countersign).
10. Bank check the Starting time this connexion automatically option.

11. (Optional) Check the Connect fifty-fifty if the network is non broadcasting option.

    Source: Windows Primal

12. Click the Next button.
13. Click the Close push button.

In one case yous complete the steps, the laptop, tablet, or desktop will automatically connect to the Wi-Fi network.

How to connect to Wi-Fi network using Command Prompt

Alternatively, yous tin as well use the netsh command-line tool in Command Prompt to connect to a Wi-Fi network.

To connect to a Wi-Fi admission signal with commands, use these steps:

1. Open up Beginning.
2. Search for Control Prompt, correct-click the top consequence, and select the Run equally administrator option.

3. Type the following control to view the available network profiles and press Enter:

   netsh wlan show profile

4. Confirm the Wi-Fi network contour with your preferred settings.

5. Type the following command to connect to the wireless network on Windows 10 and press Enter:

   netsh wlan connect ssid=YOUR-WIFI-SSID name=Contour-NAME

   In the command, think to specify the name (SSID) of the network and profile proper name with your network settings.

   For example, this control connects to the "tsunami" network using the "tsunami" profile:

   netsh wlan connect ssid=tsunami proper noun=tsunami

   Source: Windows Central

   Quick Tip: On devices with more than one wireless adapter, you must also specify in the control which adapter you lot desire to use. For example,: netsh wlan connect ssid=YOUR-WIFI-SSID name=Profile-NAME interface=Wi-Fi.

Later you complete the steps, the device will connect to the wireless network.

New network connection

The netsh tool also lets yous manage Wi-Fi adapters and networks. The only caveat is that you lot can merely manage previously known networks since yous cannot create new network profiles with this tool

When you need to use Command Prompt to connect one or multiple computers to the aforementioned wireless network, y'all can export the network profile created automatically during the first connexion. Then you can import it using the netsh tool to connect using the command-line tool.

Export Wi-Fi profile

To export a Wi-Fi contour with commands, use these steps:

1. Open Showtime.
2. Search for Command Prompt, right-click the top issue, and select the Run every bit ambassador option.

3. Blazon the following command to view the available network profiles and press Enter:

   netsh wlan show contour

4. Type the following command to export a profile and press Enter:

   netsh wlan export contour PROFILE-Name key=clear binder=PATH\TO\Export\FOLDER

   For example, this command exports the seismic sea wave profile to the "Documents" folder.

   netsh wlan export contour tsunami key=clear folder=C:\Users\m\Documents

   Source: Windows Primal

Once yous consummate the steps, you tin import the aforementioned XML file to connect other devices to the same network.

Import Wi-Fi profile

To import a Wi-Fi profile on Windows x, use these steps:

1. Open Start.
2. Search for Command Prompt, right-click the elevation result, and select the Run as ambassador selection.

3. Blazon the following command to decide the name of the network adapter and printing Enter:

   netsh wlan bear witness interfaces

4. Confirm the name of the adapter that volition connect to the network.

5. Type the post-obit command to import the network profile and press Enter:

   netsh wlan add profile filename="PATH\TO\PROFILE.XML" Interface="YOUR-WIFI-ADAPTER-Proper noun" user=electric current

   In the command, make sure to specify the location of the XML file and network interface name.

   For example, this command imports the xml profile located in the "Documents" folder to the Wi-Fi adapter:

   netsh wlan add profile filename="C:\Users\k\Documents\wi-fi-tsunami.xml" Interface="WI-FI" user=current

   Source: Windows Fundamental

6. Type the post-obit command to connect to the wireless network and press Enter:

   netsh wlan connect ssid=YOUR-WIFI-SSID name=PROFILE-Proper name

   In the control, specify the SSID and profile proper name that corresponds to your network.

   For example, this command connects to an access point using the "seismic sea wave" SSID and "seismic sea wave" profile name:

   netsh wlan connect ssid=seismic sea wave name=seismic sea wave

   Quick tip: If you have multiple wireless interfaces, you must also specify in the command which adapter you lot want to use. For example, netsh wlan connect ssid=YOUR-WIFI-SSID name=PROFILE-Name interface=Wi-Fi.

After you lot complete the steps, the reckoner should connect to the wireless network automatically.

More Windows resources

For more than helpful articles, coverage, and answers to mutual questions well-nigh Windows 10 and Windows 11, visit the following resources:

• Windows 10 on Windows Central — All you lot need to know
• Windows 10 help, tips, and tricks
• Windows eleven on Windows Central — All you need to know

Source: https://www.windowscentral.com/how-connect-wi-fi-network-windows-10

Posted by: bojorquezfrichis1979.blogspot.com

Share this post